|
Spacious
interior dimensions = approx. 230mm square or 9"x9"x9"
Flip-up
Bead Door with magnet,
opening is approx.230mm wide x 55mm high.
Fires
to 980C/1800F (Can
go higher but these are recommended max. temps for this
unit.)
Stackable
construction means you can easily remove the Bead Door
Ring, converting this to a Fusing Kiln firing to 1300C/2400F
Temperature capacity.
Plenty of heat for Slumping, PMC, etc., in addition to
Glass Beads
Infinite
Switch Controller
- SUPER easy to use, not a bother in terms of "babysitting"
required.
(Optional Digital Controller available: Bartlett 3Key
- VERY easy to program!)
Digital
Pyrometer
for accuracy in temperature readings - Farenheit measurements
at this time only. Thermocouple
with lead wire included.
Power
consumption: 240V / 7AMPS
Runs
on common Aussie household current - no need for special
outlets. (This unit will draw power roughly equivalent
to a small kitchen toaster oven.)
All
Brick construction makes
it very efficient, holds heat very well so power cycles
less to maintain temperature.
Easily
Portable -
comes apart in segments for ease in transporting.
Total weight approx. 20kg. Shipping weight approx. 21-22kg.
|
